Searching...
Loading results...
Italy total
30 companies
Loading results...
Milano
LOMBARDIA
Milano
1 company
1 company
manufacture of other consumer electronics products.
Eco R.o.e. Service S.r.l.
Via C. Amoretti, 75, Milano
Data updated in September 2026
Services (showing 3 of 3)
  • waste disposal
  • waste collection
  • waste transport
Company characteristics
  • Mercato e posizionamento - Target di mercato: Molteplici prodotti e servizi
  • Mercato e posizionamento - Target di mercato: Solo servizi
  • Presenza digitale e sito web - Qualita generale del sito: Sito senza contenuto utile facilmente leggibile da sistemi automatici

Showing 1 of 1

Loading results...
Pavia, Monza e Brianza
Loading results...
Torino, Vercelli, Biella
PIEMONTE
Torino
1 company
1 company
Manufacture of embroidery, tulle and lace.
HTC Franke - Cuscinetti Speciali Verified by CustomersAndSuppliers
Via XXIV Maggio, 40, Cuorgnè
Data updated in September 2026
Products (showing 3 of 18)
  • Vacuum fdi linear guides
  • production of special bearings and linear guideways.
  • production of linear guides
Services (showing 1 of 6)
  • exclusive distribution of Franke products
Company characteristics
  • Commerciale e marketing - Strategia commerciale: vendita tecnica (100%)
  • Mercato e posizionamento - Target di mercato: b2b (100%)
  • Mercato e posizionamento - Target di mercato: Molteplici prodotti e servizi
  • Mercato e posizionamento - Target di mercato: Sia prodotti che servizi
Notes
HTC Srl is the exclusive distributor for Italy of Franke Gmbh products.
The distinctive technology is the bearing on wire with hardened steel tracks.
The company offers full customization on materials (aluminum, carbon fibers), polymers and bronze) as well a size range of up to 7012mm.
The service covers the entire cycle from product selection to after-sales assistance and installation.

Showing 1 of 1

Vercelli
1 company
1 company
Manufacture of furniture
ILS S.r.l. Verified by CustomersAndSuppliers
Via Torino 4, Caresanablot
Data updated in September 2026
Products (showing 4 of 17)
  • production of cylinders according to ISO standards
  • design of cylinders according to ISO standards
  • construction calender rollers
  • design of aerodynamic cylinders
Company characteristics
  • Mercato e posizionamento - Target di mercato: b2b (90%)
  • Mercato e posizionamento - Target di mercato: Molteplici prodotti e servizi
  • Mercato e posizionamento - Target di mercato: Sia prodotti che servizi
  • Presenza digitale e sito web - Possibili criticità: Sito senza HTTPS
Notes
The company is specialized in the supply of hydraulic and mechanical components for industries such as agriculture, nautical industry.
The internal design for special cylinders and the processing of titanium are explicitly mentioned.
The farming range includes tractor-specific components such as third points and vertical tires.

Showing 1 of 1

Loading results...
Udine
Loading results...
Genova
Loading results...
Modena
EMILIA-ROMAGNA
Modena
2 companies
2 companies
Bitter and bitter cyclist, Vermouth tomaso agnini, Gin tabar, Sorrento lemoncello igp, Anicion, Production of liqueurs for third parties, e altro...
CESA AUTOMAZIONI S.r.l. Verified by CustomersAndSuppliers
VIA PEDEMONTANA 126, 41042 FIORANO MODENESE
Data updated in September 2026
Products (showing 3 of 5)
  • welding
  • production of roller conveyors / conveyor belts
  • assembly of machinery , plants and machine parts.
Services (showing 1 of 10)
  • mechanical assembly and dismantling
Company characteristics
  • Commerciale e marketing - Strategia commerciale: vendita tecnica (80%)
  • Mercato e posizionamento - Target di mercato: b2b (90%)
  • Mercato e posizionamento - Target di mercato: Molteplici prodotti e servizi
  • Mercato e posizionamento - Target di mercato: Sia prodotti che servizi
Notes
The predominant declared activity is mechanical and electrical assembly in the field of industrial automation.
Maintenance, installation and welding services are explicitly listed. Services such as painting or logistics (packaging & porter) will also be included in the price of your vehicle repair service!
The company operates both at its own 20,156 sq.ft premises and on the customer' s site in a multi-storey building of approximately one thousand square feet (378 m²).
Penta automazioni S.r.l. Verified by CustomersAndSuppliers
Via dell'Industria, 10, Soliera
Data updated in September 2026
Products (showing 2 of 20)
  • induction hardened rollers 50x1450
  • solutions for the handling of concrete and natural stone products.
Services (showing 2 of 9)
  • ordinary and extraordinary maintenance
  • retrofit and upgrading of existing facilities
Company characteristics
  • Clienti e relazioni - Relazione con i clienti: relazioni di lungo periodo (90%)
  • Commerciale e marketing - Strategia commerciale: vendita tecnica (90%)
  • Mercato e posizionamento - Target di mercato: b2b (100%)
  • Mercato e posizionamento - Target di mercato: Molteplici prodotti e servizi
Notes
The company has been specializing in automation for the concrete and natural stone industry since 1987.
It mentions more than 450 systems built globally, including some of the most famous.
The offer covers the entire life cycle of your plant, from pre-sales (consultancy) to after sales services such as maintenance and spare parts.

Showing 2 of 2

Loading results...
Firenze, Prato
TOSCANA
Firenze
2 companies
2 companies
Online payment policies, Tfm - key man, Collective accident police, Poles hotels and accommodation facilities, Enterprise Police, Police commercial activities, e altro...
LO.TA.R. S.R.L. Verified by CustomersAndSuppliers
via Palestro 9, Campi Bisenzio
Data updated in September 2026
Products (showing 4 of 9)
  • production accessories for shutters
  • kitchen renewal
  • restoration of wooden doors
  • installation of glass chambers
Company characteristics
  • Mercato e posizionamento - Target di mercato: b2c (100%)
  • Mercato e posizionamento - Target di mercato: Molteplici prodotti e servizi
  • Mercato e posizionamento - Target di mercato: Sia prodotti che servizi
  • Presenza digitale e sito web - Lead generation e conversione: forte focus lead generation (95%)
Notes
The company uses an exclusive processing process called Lotarizzazione®.
It offers specific B2B services with dedicated prices for architects, surveyors and construction companies.
Restoration works are covered by a five-year warranty.
The kitchen renovation service allows the transformation without complete replacement of furniture.

Showing 1 of 2

Loading results...
Roma
Loading results...
Cosenza
Loading results...
Messina
Loading results...
Mantova, Cremona, Bergamo, Lecco
LOMBARDIA
Mantova
2 companies
2 companies
fabbricazione di molle
Etikmar Verified by CustomersAndSuppliers
Via Bachelet 33, Porto Mantovano
Data updated in September 2026
Products (showing 4 of 7)
  • production of swinging steel fire door.
  • self-adhesive labels
  • neutral labels
  • labels for thermal printers
Company characteristics
  • Commerciale e marketing - Strategia commerciale: vendita tecnica (80%)
  • Mercato e posizionamento - Target di mercato: b2b (90%)
  • Mercato e posizionamento - Target di mercato: Molteplici prodotti e servizi
  • Mercato e posizionamento - Target di mercato: Sia prodotti che servizi
Notes
The company operates in the food, confectionery and detergent sector.
It has three production lines with automatic control of register and color.
The production of plants and polymers is managed entirely within the structure.
F.lli Gelati S.r.l. Verified by CustomersAndSuppliers
via G.Marconi n°108/110, Buscoldo di Curtatone
Data updated in September 2026
Products (showing 3 of 20)
  • production of aluminum frames and iron carpentry.
  • design, installation and maintenance of aluminum frames.
  • iron workings
Services (showing 1 of 15)
  • wheel trim (bending, incidence, convergence)
Company characteristics
  • Mercato e posizionamento - Target di mercato: b2b (80%)
  • Mercato e posizionamento - Target di mercato: b2c (90%)
  • Mercato e posizionamento - Target di mercato: Molteplici prodotti e servizi
  • Mercato e posizionamento - Target di mercato: Sia prodotti che servizi
Notes
The company operates as a direct manufacturer of custom fitted windows and doors that can be adapted without masonry.
The activity is divided into two macro-areas: metal carpentry and tyre workshop.
The tyre sector covers a wide range of vehicles, including agricultural (Agro) and heavy-duty trucks.
Specific partnerships with Aluk for carpentry and Pirelli/Driver in the tire sector are mentioned.

Showing 2 of 2

Cremona
1 company
1 company
fabbricazione di molle
Hainek Verified by CustomersAndSuppliers
Via del Commercio, 7, Crema
Data updated in September 2026
Products (showing 4 of 25)
  • Distribution of cylinders and packages with different types Of industrial gases.
  • distribution of welding and cutting generators.
  • production of welding and cutting equipment.
  • Welding and cutting plants
Company characteristics
  • Commerciale e marketing - Strategia commerciale: vendita consulenziale (90%)
  • Mercato e posizionamento - Target di mercato: b2b (100%)
  • Mercato e posizionamento - Target di mercato: Molteplici prodotti e servizi
  • Mercato e posizionamento - Target di mercato: Sia prodotti che servizi
Notes
The company operates as a specialist in welding, cutting and technical gases.
It is partner and exclusive importer for Italy of RED-D -ARC rental service.
It offers an assistance service with telephone diagnosis and supply of replacement machines during repairs.
It has operating offices in Crema, Madignano and Novara with branches throughout Italy.

Showing 1 of 1

Bergamo
1 company
1 company
fabbricazione di molle
meccanica-bcs.it Verified by CustomersAndSuppliers
Via Marconi n°13, Colzate
Data updated in September 2026
Products (showing 4 of 12)
  • mechanical details for drawing
  • Tube test drawers
  • bronze-aluminium alloy cams
  • steel mixers
Company characteristics
  • Mercato e posizionamento - Target di mercato: Molteplici prodotti e servizi
  • Mercato e posizionamento - Target di mercato: Sia prodotti che servizi
  • Presenza digitale e sito web - Possibili criticità: Sito senza HTTPS
Notes
The company has a fleet of machines with lathes, machining centers and CNC milling machine.
The project gallery lists specific implementations such as augers in C21 and stainless steel mixer.
Acceptance testing, instrument calibration and assembly of mechanical units are explicitly mentioned.

Showing 1 of 1

Lecco
2 companies
2 companies
fabbricazione di molle
Eltex S.r.l. Verified by CustomersAndSuppliers
Via Statale, 12, Barzago
Data updated in September 2026
Products (showing 2 of 17)
  • eltex
  • Inverter line repair
Services (showing 2 of 14)
  • retrofitting and upgrading facilities
  • disposal of irreparable equipment
Company characteristics
  • Mercato e posizionamento - Target di mercato: Molteplici prodotti e servizi
  • Mercato e posizionamento - Target di mercato: Sia prodotti che servizi
Notes
The company specializes in the repair and supply of critical components for industrial automation, with a focus on brands such as Lenze & Parker.
The washing service uses ultrasonic technology Sweep System for deep cleaning of the circuit.
It offers solutions for emergency management through rental, swap and rapid on-site interventions.
AP Rappresentanze Verified by CustomersAndSuppliers
Via Aldo Moro, 1/10, Oggiono
Data updated in September 2026
Products (showing 4 of 128)
  • disc sawing machines
  • electrostatic powder dispensing plants
  • Die Cast Detachers
  • lubricants of vegetable or mineral origin for molding.
Company characteristics
  • Clienti e relazioni - Relazione con i clienti: relazioni di lungo periodo (85%)
  • Commerciale e marketing - Strategia commerciale: vendita consulenziale (95%)
  • Mercato e posizionamento - Target di mercato: b2b (100%)
  • Mercato e posizionamento - Target di mercato: Molteplici prodotti e servizi
Notes
The company operates as a sales representative specialized in the metalworking sector, with specific focus on aluminium foundry (ingot and alloy rims).
The offer includes both chemical and refractory consumables as well machineries for metal cutting & finishing.
Specific brands and products such as Bonderite, Alfecleaning or ECOSAFE PLUS are explicitly mentioned.

Showing 2 of 2

Loading results...
Chieti
ABRUZZO
Chieti
1 company
1 company
fabbricazione di molle
Tecno Profili s.r.l. Verified by CustomersAndSuppliers
Via Borgata Fattore, 23, Santa Maria Imbaro
Data updated in September 2026
Products (showing 4 of 22)
  • blinds, monoblocks, dumpsters, counters
  • single-block roller shutters
  • Scrapers for shutters
  • bolts
Company characteristics
  • Commerciale e marketing - Strategia commerciale: vendita tecnica (90%)
  • Mercato e posizionamento - Target di mercato: b2b (100%)
  • Mercato e posizionamento - Target di mercato: Molteplici prodotti e servizi
  • Mercato e posizionamento - Target di mercato: Sia prodotti che servizi
Notes
The company claims 25 years experience in the production of monobloc, roller shutters and mosquito net.
The monoblocks (Tecnoblocco, Termoblocca and Edilblokko lines) integrate a counter frame with boxes for storage of materials. They also have certified thermal/acoustic insulation
The offer includes specific solutions for energy refurbishment and new construction.

Showing 1 of 1

Loading results...
Treviso, Vicenza
VENETO
Treviso
1 company
1 company
fabbricazione di molle
SMARTLOG Verified by CustomersAndSuppliers
VIA TRIESTE 80/6, VILLORBA
Data updated in September 2026
Products (showing 3 of 25)
  • automatic radio shuttle for pallets
  • logistics automations
  • Shuttle for boxes and packages
Services (showing 1 of 9)
  • ordinary and extraordinary maintenance
Company characteristics
  • Mercato e posizionamento - Target di mercato: b2b (100%)
  • Mercato e posizionamento - Target di mercato: Molteplici prodotti e servizi
  • Mercato e posizionamento - Target di mercato: Sia prodotti che servizi
  • Mercato e posizionamento - Target di mercato: system integrator (100%)
Notes
The company explicitly distinguishes between ‘Solutions’ (complete turnkey projects) and 'Products'(single standard modules).
A specific specialization in mixed pallet handling and picking automation is declared.
Services cover the entire project lifecycle, from initial data collection to 24/7 after-sales support.

Showing 1 of 1

Vicenza
2 companies
2 companies
fabbricazione di molle
G.r. montaggi S.r.l. Verified by CustomersAndSuppliers
Via dell'Edilizia, 10, Vicenza
Data updated in September 2026
Products (showing 2 of 16)
  • light and medium carpentry
  • Rollers with rubber or adiprene coating.
Services (showing 2 of 22)
  • punching and roding cnc
  • Packaging and dispatch
Company characteristics
  • Mercato e posizionamento - Target di mercato: Molteplici prodotti e servizi
  • Mercato e posizionamento - Target di mercato: Sia prodotti che servizi
Notes
The company operates as a contractor for the construction and assembly of industrial machinery.
It manages the entire production chain, from carpentry to final testing.
Collaborates with external partners for electrical wiring and specific packaging.
It has an in-house laboratory for chemical and physical analysis of treatments.
b&b metalwork s.r.l. Verified by CustomersAndSuppliers
Via Due Camini, 27, Zanè
Data updated in September 2026
Products (showing 4 of 5)
  • welding
  • turning
  • Industrial rollers
  • Precision mechanical components
Company characteristics
  • Mercato e posizionamento - Target di mercato: Molteplici prodotti e servizi
  • Mercato e posizionamento - Target di mercato: Sia prodotti che servizi
  • Mercato e posizionamento - Target di mercato: terzista (100%)
  • Struttura e dimensione - Dimensione aziendale: azienda familiare (100%)
Notes
Specialized in the manufacture of industrial rollers up to 1025 mm diameter and length.
Machining of ferrous materials, stainless steels and aluminium. Bronze & brass as well plastic material like Teflon or Nylon
Production capacity for single parts and small batches up to 501 units.
UNI EN ISO 9001:2015 certified company

Showing 2 of 2

Loading results...
Bologna, Rimini
EMILIA-ROMAGNA
Bologna
2 companies
2 companies
fabbricazione di molle
Belabs S.r.l. Verified by CustomersAndSuppliers
viale G. Fanin 48, Bologna
Data updated in September 2026
Products (showing 2 of 15)
  • air analysis systems
  • air pollution analysis systems
Services (showing 2 of 12)
  • programmed maintenance and extraordinary environmental instrumentation
  • rental of mobile laboratories and individual analyzers
Company characteristics
  • Mercato e posizionamento - Target di mercato: b2b (95%)
  • Mercato e posizionamento - Target di mercato: Molteplici prodotti e servizi
  • Mercato e posizionamento - Target di mercato: Sia prodotti che servizi
  • Presenza digitale e sito web - Qualita generale del sito: sito professionale (90%)
Notes
The company specializes in systems for monitoring air pollution and Air Quality.
It offers both proprietary products developed in-house and distribution of third party brands such as Synspec, Ecochem.
Services cover the entire lifecycle of systems, from design to maintenance and remote data management.
It has mobile laboratories equipped for in-field monitoring of various pollutants (NOx, CO and SO2).
Jinan Bodor CNC Machine Co.,Ltd. Verified by CustomersAndSuppliers
High-tech Zone, Bologna
Data updated in September 2026
Products (showing 4 of 14)
  • Portable laser welding machines
  • automatic loading and unloading systems
  • semi-automatic loading systems
  • production and sales of fiber laser cutting machines.
Company characteristics
  • Mercato e posizionamento - Posizionamento competitivo: leader di mercato (90%)
  • Mercato e posizionamento - Target di mercato: Molteplici prodotti e servizi
  • Mercato e posizionamento - Target di mercato: Sia prodotti che servizi
  • Struttura e dimensione - Distribuzione geografica: multinazionale (95%)
Notes
The company is a manufacturer specializing in fiber laser technologies for metal processing.
The offer includes a full range of industrial automation systems such as iTrans and the newly developed system for automatic loading.
After sales service is supported by 18 global parts warehouses and dedicated local teams.

Showing 2 of 2

Rimini
2 companies
2 companies
fabbricazione di molle
F.o.m. industrie S.r.l. Verified by CustomersAndSuppliers
Via Mercadante, 85, Cattolica
Data updated in September 2026
Products (showing 2 of 26)
  • production of processing and cutting lines.
  • production of cutting lines
Services (showing 2 of 8)
  • periodic and predictive maintenance
  • digital services via VIP area
Company characteristics
  • Mercato e posizionamento - Target di mercato: b2b (100%)
  • Mercato e posizionamento - Target di mercato: Molteplici prodotti e servizi
  • Mercato e posizionamento - Target di mercato: Sia prodotti che servizi
  • Presenza digitale e sito web - Analisi qualitativa digitale: azienda digitalmente matura (95%)
Notes
The company specializes in machine tools for cutting and machining aluminium extrusions.
The LOLA platform enables cloud-based monitoring of machine performance and diagnostics.
The CARL application uses augmented reality for the design of production space.
The spare parts department manages more than 25,016 items ready for shipment.
SA.MA GREEN RECYCLE Verified by CustomersAndSuppliers
Via Savina 2218, Santarcangelo di Romagna
Data updated in September 2026
Products (showing 2 of 13)
  • production and sale of rags for industrial use.
  • production and sale of technical cloths
Services (showing 2 of 8)
  • industrial waste disposal
  • disposal of special, hazardous and non-hazardous waste.
Company characteristics
  • Commerciale e marketing - Strategia commerciale: vendita consulenziale (80%)
  • Mercato e posizionamento - Target di mercato: b2b (100%)
  • Mercato e posizionamento - Target di mercato: Molteplici prodotti e servizi
  • Mercato e posizionamento - Target di mercato: Sia prodotti che servizi
Notes
Company registered in the Environmental Managers Register with authorization n° BO/019256.
Authorization to transport solid and liquid waste on behalf of third parties.
This service is aimed at car repair shops, lathes and turning centers; mechanical works. printing houses or paint plants
The disposal service includes rags, filtering materials and packaging material as well spray canned products like solvents or emulsion.

Showing 2 of 2

More provinces with matching companies

You have reached the daily limit of 20 companies. Come back tomorrow or Activate the free trial
  • Pavia
    1 company
  • Monza e Brianza
    1 company
  • Biella
    1 company
  • Udine
    1 company
  • Genova
    1 company
  • Prato
    1 company
  • Roma
    1 company
  • Cosenza
    1 company
  • Messina
    1 company